共 16+ 张图片,点击图片进入幻灯

已经最后一张了……继续点击则返回第一张。

微信扫码在小程序里立即查看此建筑(秒开体验)

编辑导读:这个玻璃凉亭根据场地内的老树的方向来进行布置,建筑的形体采用了有机的形式,由多达几百块的非标玻璃组装而成,建筑的另一特色是将结构与机电通风设施融为一体,由此,使用空间显得宽敞通透。(经典值评价:7.1)
项目概况:
建筑设计:JOHO Architecture
地点:韩国(Seogwipo-si, Jeju-do, South Korea)
主持建筑师:Jeonghoon Lee
建筑面积:264.6 m2
完工时间:2016
照片版权:Archframe
 
项目简介:
九桥高尔夫俱乐部的凉亭建在一棵古老圣树的纪念地。在现在的高尔夫球场建成之前,这棵中国的朴树(hackberry)大约有600年的历史。凉亭根据老树的方向重新排列场地,并在自然算法中找到其项目主题。
 
受到自然算法基本结构的启发,我们设计了一个“双管道系统”,将结构和设施融为一体。内风道用于通风,用12mm厚的钢框架包裹,形成整体结构。这两个管道之间覆盖着高度密集的绝缘材料,以防止在操作冷却和加热系统时出现室内外温差的结露。
 
为了控制这种带有双曲面的有机形式,我们使用了6个主要结构和19个子结构。 结构上安装了约160副非典型的半钢化玻璃,侧面安装了约280块曲面玻璃。440块不同尺寸的玻璃板在中国的一家工厂生产,组装在当地制造的结构上。首尔附近一家工厂生产的内部结构被拆卸成80件,运到济州岛重新组装。这种半钢化的成对玻璃,有140种不同的曲率,在中国工厂制造,在韩国组装。
 
这是一项复杂的任务,在韩国和中国分别生产的材料在现场重新组装时只允许相差不到5毫米。结构主要分为6股,有通风管道,安装了48根管道,以响应室外空气温度,保持室内温度一致。



Design Team:unhee Cho, Bong-gwi Hong, Moonyoung Jeong
 
Construction:CJ Engineering & Construction + IlJin Unisco
Text description provided by the architects. The Pergola of The Golf Club at NINE BRIDGES is a structure built on a location that honors an old sacred tree. The Chinese hackberry, which stood for roughly 600 years before the present golf course was constructed, unconsciously instated a place of animism. The pergola rearranges the site in accordance with the orientation of an aged tree and finds its project motifs in natural algorithms.
 
 
 
Inspired by the essential structures of natural algorithms, we have devised a ‘dual-duct system’ that integrates both the structure and the facility. The inner duct is used for ventilation and wrapped with a 12mm thick steel frame to form the overall structure. The two ducts are covered with highly dense insulating material in between, to prevent dew condensation from indoor-outdoor temperature difference when operating cooling and heating systems.?
 
 
To control this organic form finished with double curved surfaces, 6 main structures and 19 substructures were used. About 160 atypical, semi-tempered pair panes of glasses were placed on the structure and roughly 280 curved panes of glasses were applied on the flank. 440 glass panes of differing sizes were manufactured in a factory in China and assembled onto a locally manufactured structure. The inner structure produced at a factory near Seoul was disassembled into 80 pieces and shipped to Jeju Island for reassembly. The semi-tempered paired glass panes, with 140 different curvatures, were manufactured at the Chinese factory and assembled in Korea.?
 
 
This was a task that required sophistication, only allowing for a less than 5mm difference between the materials manufactured separately in Korea and China when they were to be reassembled at the site. The structure was mainly divided into six strands had a ventilation duct installed with 48 duct pipes to respond to the outside air temperature and to maintain a consistent indoor temperature.
 

要发表您的看法,请先登录